- cm fx500
- Input shaft bearing sleeve issues
- Just installed Mad Dog 80%...
- Which Clutch?
- Maxfastest Trans Carnage !! MNBWS !!
- DIY Clutch Install Issues...
- upgraded clutch??
- tranny fluid change
- clutch will not disengage
- Stock shifter > Mopar STS with booger bushings
- Hydraulic system problems
- max boost on stock clutch?
- 3rd gear problem
- I need a clutch alinment tool
- 1st gen neon shifter question
- Quick Question on Royal Purp ATF
- Need Lsd Help
- Daily driven 400whp Clutch?
- Noise when start car and always when car is at idle
- how much i can sell stock tranny internals
- broke driver side axle, COME SEE
- Help<<....
- Axle seals
- What Part is This?
- code p3833 code p0239 what do they mean
- code p3833 code p0239 wjat do they mean
- Clutchmaster or ACT
- Final Drive Ratio
- csrt4 transmission
- shift fork? where to get one
- Shreaded splines on CV axle...
- TOB Fork pivot ball removal?
- stage 1,2 &3 trannys...
- hestiancy to downshift into 3rd
- hard 1st no go in 3rd ?
- Guide somewhere to putting in a quaife in an '03?
- Help input shaft
- technical answers please
- Transmission Question...
- Clutchmasters FX400 Clutch Kit(MODULAR)
- stuck in 3rd gear but shift selector is fine?helop
- which clutch to get?
- Helpful input please
- str8 up engine or transmission as well??
- Clutch going out?
- tranny fluid?
- Is there a difference in the 04-05 trannies???
- Clutch install questions
- Little help with a clutch!
- Mopar offers rebuilt cv axles now???
- ACT Street Clutch Kit grinds when engaged[HELP]
- Axle seals - differences?
- Possible axle problem
- nsrt quaffi onto csrt trans?
- Gear oil leaking from passenger side *PICS*
- only gear i have is 3rd????help??????
- Trouble getting into 1st and reverse
- 142,000 km should i change transmission fluid?
- need 2 stock bushings for shifter
- A built tranny for 500hp?
- Has anyone actually fixed their problem when the SLAVE CYLINDER was replaced?
- Broken 3/4 shift fork FTW!!! Pics!
- 05 tranny going bad?
- Gear sizes, ratios etc...
- clutch came apart
- Need Part Number - Clutch Pedal Problem!
- Clutch Trouble
- Booger Bushings
- Flywheel Bolts
- FX300 Stage 3 Advise
- Hurst Shifter
- squiky shifter going into gears
- noise in tranny
- clutch install
- Bad Flexplate?
- Grinding Noise going into first
- having problems shifting
- 3rd gear problem
- clutch shutter need help asap
- Transmission rebuild/upgrade kits?
- Weird issue with shifter...
- Clutch Shutter Prob...
- Having problems getting in to all gears!!!
- clutch removal
- Wierd sound when shutting off car...
- SouthBend clutch thoughts
- Weird Problem!
- Transmission Leaking. PICS Inside.
- Dowel Pin Locations
- Booger bushing installs
- Vibration...idk wth it could be
- Solid Metal shifter bushings?
- Bad ACT Experience
- Heelllppp Whats The Best Clutch
- Stage 3 With Mopar Clutch On Slicks, Anybody Doing It Sucessfully?
- Swapping struts and my axle falls out???
- ACT clutch ?
- Another guy with stage 3 needing a clutch.
- need new clutch.which is better?
- new clutch problems
- cable binding?
- need help asap
- Passenger side axle
- wtf
- Soooo Confused!!!need Help Please
- one of my clynders is going bad..
- Double Checking before I buy
- Need some torque specs for install-help
- trans fluid
- Need CV axle boot diameter
- Ugh, pivot ball help
- Driveplate-to-clutch bolts
- Clutch engagement issues
- srt4 clutch cutter to fit t350
- axle seal?
- Wheel bearing...and the HUB?
- ACT Xtreme SRT-4 Clutch Kit Advise..
- Axles !!!!
- Tranny Issues HELP !!!
- Need Help Now!!! Trany/clutch/throw Out Bearing...
- hard shifting, any ideas
- New Re-designed Non-Modular SouthBend Clutches!
- confused..
- Help! Need T-850 Expert
- the every day in different way 3rd gear problem
- Clutch engages when pedal almost an inch off the floor
- 3rd gear pissing me off
- clutch install questions
- Cryogenics
- very wierd problems
- 400 hp clutch you can feather?
- Is the clutch Done??
- Whats the horsepower limits on stock tranny
- Hard Shifting
- Want to buy SPEC Stage 3 clutch.
- Automatic to Manual
- Clutch amateur
- hard to shift gears from a stop
- Does anybody have the oem axles in stock?
- Which clutch? 400HP Daily Driver.
- Which of The Two Clutches??
- I think i have a problem.
- billet shift selector install
- has anybody replaced the reverse light switch?
- help with clutch/tranny
- Stock clutch prob
- Friction modifier
- Need Help with Dropped Tranny!!
- Big Problems In Third Gear
- Pop goes the Tranny. Help Please?
- Amsoil ATF
- Solid Mounts question
- Bolt by Speed sensor won't go in. Help!
- Where is the grease coming from?
- u joints?
- is my slave cylinder shot
- Cold side pipe blew off at WOT
- broken flywheel?
- Clutch install question need help
- Ball joint on LCA is now F'ed up
- could this be the problem , slave cylinder
- just replaced the master slave assembly, still problems
- Shifter moves up and down slightly in all gears
- What is this part?
- clutch or something not working... someone help please!!!
- clutch help?
- What is all needed so i can actually shift at 7k?
- Reasons behind broken input shafts?
- Should i upgrade my axles?
- Shift cover question???
- axle popped out of differential, need help
- Need Help ASAP!
- I dont know whats wrong! A little help??
- act 2100?
- HELP! I F'd up Removing Axle Seal
- How to diagnose a possible bad axle(s)?
- bleeding clutch?
- new clutch, new what else?
- SBC Stage 3 or ACT Street Disk
- Overshooting 2nd & 4th, just started
- Trans broke, shop fixed it and broke 5 days later
- Quaife LSD Install
- breaking in clutch??
- shift fork question
- Why is ACT always running out of clutchs
- Hard to shift into gear
- Slipping Clutch
- Torn CV axle boots - Whats the cause!
- clutch noise??
- Do I have a case?
- what else could it be???
- New ACT pressure plate that fixes 7k+ misshifts?
- want to replace clutch soon
- Need help
- quick act question
- What Could This Be?!?
- Who sells a better than stock clutch fork?
- Do I need to replace the master and the slave cylinder
- Snapped Axle, replacement question
- engine rev while boosting
- Need a NEW clutch.
- Caliber 6-speed into Neon SRT-4
- Noisy TOB? Video
- Looking for a how to replace slave master cylinder
- Good bye t850
- Pressure Plate Bolt Pattern?
- Anyone Need A TOB? Click Here!
- Easy to upshift into 2nd, hard to downshift in 2nd. What is it?
- Aftermarket Gears or built trasmissions?
- 3rd gear kick out ?!
- New clutch recommendations
- Is there a way to adjust where the clutch engages/disengages?
- Tranny is pooched. What would you replace while in it??
- Need help bleeding my clutch ive tried everthing
- transmission blown?
- Slipping clutch when above 60 out???
- Broken Input Shaft - Replace Clutch?
- Track And Tranny
- 1st gear deep whine
- quick 3rd gear grind question...
- the never ending tranny noise
- Flywheel vs No-Flywheel
- hurst sts install questions
- hard to shift only when flooring it
- what is the best fluid to put into the tranny to help it out the most?
- 2 Trannys Need fixing, plz help
- Need help Deciding Clutch!
- New Clutch
- Noise, just curious what it could be
- So everything I...
- Thump sound when turning. ...
- 3rd gear grind, Factory defect found?!! *pics* Chrysler, ARE YOU LISTENING?
- Weird vibration after warm up - only when in gear/clutch depressed. Help?
- Hard shifting question!
- Installed Booger Bushings and WOW
- Sticky Gears
- ACT clutch after 8,000 miles *PICS*
- 04-05 tranny in a 03?
- URGENT-should i drive or not
- If u have problems with your southbend clutch
- where to find flywheel bolts
- Shift Selector help!!!!!!
- how many tranny bolts
- Short Throw Shifter Install
- WOW! If you are having trouble shifting, adjust the crossover cable?
- vibration at 2k after clutch installed
- Dealer says 8oz of friction modifier now needed...lol
- Tranny vibration
- Crane 14 questions.
- Need TOB Fork & Piviot Ball